The 32nd International Exhibition on Plastic & Rubber Industries
PBSS-1005Q-VS- PE (4+4) three-layer Blow Molding Machine
The Sheng Mei PBSS-1005Q-VS- PE(4+4) three-layer Blow Molding Machine is used to produce 1L-20L packing plastic containers such as detergent bottles, shampoo bottles, cosmetic bottles, medicine bottles, machine oil cans, and chemical bottles. The light and heavy duty bottles are suitable for daily use products and industrial goods.
Applicable materials: PE, PVC, PP, PETG, PU, PA, EVOH and MR.
| Type | PBSS-1005S | PBSS-1005D | PBSS-1005T | PBSS-1005Q | PBSS-1005H | PBSS-1005O | PBSS-1005TT | PBSS-1005TW | PBSS-1005D-TL-PE | PBSS-1005Q-VS-TL-PE | |
| (Unit) | one piece | (two pieces) | (three pieces) | (four pieces) | (six pieces) | (eight pieces) | (ten pieces) | (twelve pieces) | two pieces and double layered | four pieces with white wire and double layered | |
| Mold | sketch |  |
 |
 |
 |
 |
 |
||||
| Center distance | - | 270 | 250 | 160 | 100 | 85 | |||||
| A | 220*210*300 | 180*120*300 | 150*100*300 | 120*95*300 | 80*70*300 | 65*40*300 | |||||
| B | 220*210*300 | 180*120*300 | 150*100*300 | 120*95*300 | 80*70*300 | 65*40*300 | |||||
| C | 230*300 | 165*300 | 140*300 | 120*300 | 85*300 | 60*300 | |||||
| D | 225*300 | 145*300 | 125*300 | 110*300 | 75*300 | 50*300 | |||||
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 8
Servo Pump Drive Motor (HP): 40
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 12-25
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.7x5.3x3.9
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | 20 | 51.6 | 220*58*58 | / | 450-929 | 600 | 610 | 21 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5-8
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 2-5
Actual Power Consumption (kw/h): 70
Machine Size (m): 5.3x6.4x3.7
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 95*65*65*35 | 26/1x24/1x24/1 | 65*20*20*3 | 15-65 | 30 | 56.7 | 150*58*58*15 | 270 | 240-616 | 365 | 640 | 17 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5-8
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 2-5
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.8x7.2x3.3
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | 27 | 84.3 | 220*58*58 | 250 | 240-616 | 400 | 800 | 21.5 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5
Servo Pump Drive Motor (HP): 40
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 0.5-2
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.0x6.8x3.4
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | 26 | 60 | 220*58*58 | 180 | 240-616 | 372 | 640 | 20 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 1-2.2
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.9x5.8x3.3
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | 43 | 87.13 | 220*58*58 | 160 | 240-640 | 365 | 1000 | 28 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 0.2-0.6
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.9x5.8x3.3
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | 30 | 54 | 220*58*58 | 85 | 240-640 | 325 | 1000 | 28 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 0.2-0.6
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.9x5.8x3.3
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | counted as per layer | counted as per layer | 220*58*58 | 85 | 240-640 | 320 | 1000 | 28 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 5
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 5-10
Product Volume (L): 0.2-0.6
Actual Power Consumption (kw/h): 76
Machine Size (m): 5.9x5.8x3.3
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 100*65*65 | 26/1x24/1x24/1 | 75*20*20 | 15-65 | counted as per layer | counted as per layer | 220*58*58 | 80 | 240-640 | 320 | 1000 | 28 | 800 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 8
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 6
Product Volume (L): 10
Actual Power Consumption (kw/h): 75
Machine Size (m): 7.9x6.1x3.5
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 80*100*80 | 26/1x26/1x26/1 | 40*70*40 | 15-50 | 30 | 69 | 100*180*100 | 270 | 240-640 | 400 | 640 | 26 | 165 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Cycling Time (Two Sides) (s): 12
Servo Pump Drive Motor (HP): 50
Air Pressure (Kg/cm2): 6
Product Volume (L): 4-5
Actual Power Consumption (kw/h): 92
Machine Size (m): 10x7.0x3.9
| Main screw diameter(mm) | Main screw L/D Ratio (L/D) | Extrusion Motor (HP) | Screw rotation speed(p.m.) | Heating Number (Zone) | Heating Power(KW) | Extrusion capacity (kg/hr.) | Mold center distance(mm) | Mold Open to close distance (mm) | Mold height(mm) | Mold width(mm) | Mold clamping force(Ton) | Oil Tank Volume (Gallon) |
| 80*115*80 | 26/1x26/1x26/1 | 40*400*40 | 15-50 | 49 | 113 | 100*260*100 | 270 | 240-540 | 450 | 1150 | 32 | 206 |
Note: the specification form above is just for reference, it is subject to our final confirmation.
Remarks
1. Cycling time is related to the finished products, the bigger the product, the longer the cycling time.
2. Number of layers is related to the number of screws. For each layer removed, a screw is removed.
3. Above data is only for reference, further changes will not be advised.
4. Sheng Mei will provide mold bore drawings for mold reference.
Function Character
1. PBSS-1005Q-VS- PE(4+4) three-layer Blow Molding Machines have two mold carriages and 4 mold heads. They can be used to make three layer 4L machine oil bottles with handles and liquid level lines. They are also fit with a secondary cooling unit which helps to shorten cycling time.
2. When the product weight is 225g, cycling period is 28 seconds to make 8 pieces (3.5 seconds per piece), i.e. 24686 pieces for each 24 hours.
3. Quality control system to ensure high production capacity.
4. Highly automatic operation and high production efficiency with stable product quality and low labor cost.
Sheng Mei Plastic Machinery
Sheng Mei's plastic machinery is designed for highly automated operation to minimize the man power required in production and to maximize the quality of products. Our machinery features a multi-layered fully automatic functional barrier design, which minimizes material costs and provides excellent sealing performance. This prolongs storage and preservation effects. Products produced using Sheng Mei machines are environmentally friendly as their raw materials can be recycled, making them a suitable alternative to many glass and metal containers.
